Estimation of the dental movements caused by Narval® Oral Appliance in the treatment of adult obstructive sleep apnea hypopnea syndrome

Research Article | DOI: https://doi.org/10.31579/2692-9562/019

Estimation of the dental movements caused by Narval® Oral Appliance in the treatment of adult obstructive sleep apnea hypopnea syndrome

  • JC Letievant 1
  • G Buiret 2
  • E Dinkel 3
  • B Navailles 4
  • 1 Service d’ORL et de chirurgie cervicofacial, Centre Hospitalier Lyon Sud, Chemin du Grand Revoyet, 69495 Pierre-Bénite France.
  • 2 Service d’ORL et de chirurgie cervicofaciale, Centre Hospitalier de Valence, 179 Boulevard du Maréchal Juin, 26953 Valence, France.
  • 3 Service d’ORL et de chirurgie cervicofaciale, Centre Hospitalier des Portes de Provence, Quartier Bosseret, route de Sauzet, 26200 Montélimar, France.
  • 4 Service d’ORL et de chirurgie cervicofaciale, Centre Hospitalier de Valence, 179 Boulevard du Maréchal Juin, 26953 Valence, France.

*Corresponding Author: G Buiret, Service d’ORL et de chirurgie cervicofaciale, Centre Hospitalier de Valence, 159 Boulevard du Maréchal Juin, 26953 Valence, France.

Citation: JC Letievant, G Buiret, E Dinkel and B Navailles (2021) Estimation of the dental movements caused by Narval® Oral Appliance in the treatment of adult obstructive sleep apnea hypopnea syndrome. J, Of Clin Otori 3(1); DOI: 10.31579/2692-9562/019

Copyright: © 2021, G Buiret, This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Received: 21 January 2021 | Accepted: 12 February 2021 | Published: 13 March 2021

Keywords: oral appliance; side effects; dental displacements; obstructive sleep apnea syndrome

Abstract

Objective: oral appliances are one of the treatments of obstructive sleep apnea hypopnea syndrome. They all have dental anchoring points, causing potential changing in the dental occlusion with time. The aim of the study was to evaluate dental displacement induced by Narval® oral appliance in the treatment of the adult mild to severe obstructive sleep apnea hyponea syndrome.

Material and methods: The study was based on 15 adults with mild to severe obstructive sleep apnea hypopnea syndrome treated with a Narval® oral appliance for more than one year. Before oral appliance delivery and more than one year after oral appliance delivery, dental impressions were performed and digitized by a 3D scanner. The dental positions were calculated by the software 3D Reshaper® and compared.

Results: The mean wearing time of the Narval® oral appliance was 13.5 months (±2.1). The mean mandibular advancement was 6mm (±2). For the maxillary arch, there was a significant distalization of molar and premolar-canine blocks from 0.12 to 0.20mm (all p<0.05) and a significant proclination of incisal blocks of 0.18mm (p<0.05). For the mandibular arch, there was a significant mesialization of the molar and premolar-canine blocks of 0.14 to 0.25 mm (p<0.05) and a non-significant retoclination of the incisors of 0.09 mm.

Conclusions: The Narval® oral appliance produced minimal but significant teeth movements on the maxillary and mandibular at the short and medium term.

Introduction

Oral appliances (OAs) are one of the therapeutic options for treating Obstructive Sleep Apnea Hypopnea Syndrome (OSAHS). French Health Authorities current recommend them as a second-line treatment in failure or intolerance to Continuous Positive Pressure Ventilation (CPPV) in severe OSAHS or as a first-line treatment in moderate OSAHS [1, 2]. Two concomitant mechanisms of action have been described [3-5]: 1. the increase in the diameter of the upper airways by advancing the mandible: anteriorization of retrobasilingual space, lateral expansion of pharyngeal walls and soft palate; and 2. the action on the stretch receptors of the genioglossus muscle, probably by decreasing its hyperactivity. There are many types of OAs, with varying efficacy and tolerances [6]. Among them, the efficacy of Narval® OA has been reported in the short [7-9] and long terms [10].

On the other hand, all OAs anchor on dental arches. Their use can therefore lead to a change in dental occlusion, by dental and/or bone bases displacement, in the short-, medium- and long-terms [11-17].

The aim of this study was to evaluate the dental displacement caused by the Narval® OA in adult patients with mild to severe OSAHS.

Methods

Population

We conducted a comparative “before and after” study without control. All patients treated by OA for more than a year for a mild to severe OSAHS who consulted in our unit between 03/02/2010 and 31/08/2011 were eligible.

All patients were carriers of a Narval ® Computer-Aided Design and Computer-Aided Manufacturing OA, manufactured by Resmed Laboratory (Saint Genis Laval, France). It is a custom-made bibloc-type OA made of semi-rigid gutters articulated by a system of triangles and connectors for titration (Figure 1).

Figure 1. Narval® OA (courtesy Resmed Laboratory)

The indications and contraindications of the OA were described by Clark [18].

The non-inclusion criteria of the study were: poor compliance at the OA daily port (less than five days per week), a decrease of less than 50% of the apnea hypopnea index thanks to the OA, air bubbles in the dental prints, a poor-quality scanned plaster dental print, or a modification of the dental arch by dental care.

The main aim of the study was to compare the dental position per teeth block before the OA to at least one year after OA use.

The primary outcome was dental geolocation. The position of the points before the OA was compared to that after the wearing of the OA of at least one year. 

The secondary objective was to determine the direction of dental modifications if the primary aim was met.

The secondary outcome was dental geolocation according to possible axes of modification: mesialization, distalization, vestibulization, linguoversion, ingression and aggression.

Process of the OA manufacturing and the study

The process of OA manufacturing in our otorhinoloaryngology unit has already been reported in other articles [9, 1019]. In summary, a complete otorhinoloaryngology and dental clinical examination, as well as an orthopantomography and a profile teleradiography, were performed prior to the initial dental printing, i.e. before the OA treatment was implemented, allowing the manufacture of OA. The second dental prints were taken more than a year from OA delivery under the same conditions.

The prints were made with Zerosil® soft, vulcanizing silicone by addition, suitable for taking situation prints. They were then sent to the OA production site (Resmed Laboratory, Saint Genis Laval, France). A positive moulding was made, allowing to recreate the patient's dental occlusion. This moulding was then digitized. The position of each tooth was determined by the geolocation of an average of 60 points per tooth. The comparison of dental occlusions before/at least one year after wearing OA was carried out with the 3D Reshaper® software by calculating the modification of distances and dental positioning. The final accuracy of the procedure was in the order of one-tenth of a millimeter.

The results provided information on the variability in the space of each tooth: mesialization (anterior displacement), distalization (posterior displacement), vestibulization (external lateral displacement), linguoversion (internal lateral displacement), ingress and egress.

For the calculation of dental mobility, the teeth were grouped by block:

Block #1: left molar teeth (teeth # 8, 7, 6) 

Block #2: left premolar and canine teeth (teeth # 5, 4, 3) 

Block #3: incisive teeth (teeth # 2, 1, 1, 2)

Block #4: right premolar and canine (teeth # 3, 4, 5) 

Block #5: right molar teeth (teeth # 6, 7, 8) 

Each block was also distinguished by the letter S (as superior) for maxillary teeth and the letter L (as lower) for mandibular teeth.

Statistical analayses

After checking the normal distribution of the data, comparisons of means on paired data were made (ANOVA).

The population size to be included was made with the R software (library pwr) on paired data. A dental displacement difference of 0.1mm with an α-risk of 0.05 and a power of 0.8 led to 787 patients to integrate.

The tests were carried out on the software spss for Windows version 12 (IBM, Armonk, NY).

Results

Of the 40 eligible patients, 15 patients were finally included (37.5%, 4 men and 11 women). The flowchart is presented in the (Figure 2).

Figure 2: flowchart of the study

The mean age of the patients was 50.5 years (±20.5). The mean duration of the OA was 13.5 months (±2.1). The average mandibular propulsion was 6 mm (±2).

Table 1 shows the mean dental mobilization. There was a significant dental displacement of each mandibular and maxillary dental block.

Table 1. Mean dental movements (±standard-error) (mm)

Mean dental block displacements and their directions are reported in (Figure 3). 

Arrows represent the directions of significant (in blue) and non-significant dental movements (in red)Figure 3. Representation of the analysis of mean dental movements by dental block and direction.

In addition, there were dental height movements: 

- a sub-millimeter ingress for some teeth in the maxillary arch: 27 for three patients, 17 for four patients, and 16 for two patients.

- an egress for some teeth of the mandibular arch: 37, 36, 47 and 46 in a single patient.

Dental displacement per block per patient is reported in Appendix 1.

Discussion

This study showed that Narval® OA caused a significant dental displacement in every block, variable in importance and direction according to the dental block. It has led to a distalization of the maxillary teeth and a mesialization of the mandibular teeth. But amplitudes of dental movements were low (0.1 to 0.25mm).

Previous studies have shown that there was dental and bone modifications as well as dental displacement, regardless of the type of OA used [12-17, 20]. Force vectors directions are different from one OA to another, depending on the design [6]. Combined with the teeth on which these vectors are applied (mono- or multi-radicular), dental movements can be anticipated. For instance, Marklund et al. [13], using a bibloc OA in propulsion with a mean mandibular advancement comparable to our, showed a mesialization of 0.3 to 0.6mm of molars and 0.4 to 0.5mm of premolars, regardless of upper and lower dental arches. Hammond et al. [14] studied the dental and bone bases movements of a bibloc OA with cylinders propulsion (equivalent to a Somnodent® OA from the Somnomed laboratory). They also found a mesialization of the mandibular molars of 0.3 ±0.77mm. In our series, dental displacement seemed less (0.1 to 0.25mm).

Herbst-type OAs would cause dental movements opposite the Narval® OA. For molars and premolars their respective movements could be explained by the differences in forces exerted by these two types of OAs [21-23], as well as support on mandibular monoradicular teeth, more prone to movements compared to multiradicular teeth. Herbs-type OAs exert antero-lower direction forces resulting in the mesialization of the teeth of the maxillary and mandibular arches. Narval® OA exerts posterior forces for maxilla and anterosuperior for the mandible [21], resulting in a distalization of the teeth of the maxillary arches and a mesialization on the mandibular arch. For incisors, the contrast of movement observed between the Herbst-type OAs and the Narval® OA could also be partly explained by the absence of total recovery at the incisors with the Narval® OA: the anterior headband being in contact only with the anterior facet of the incisors.

Dental displacement studies also focused on studying the anteroposterior movements of incisors. Wearing an Herbst-type OA resulted in a mean palatoversion of the upper incisors [12-15, 20], from 0,8° ±4,7° [15], to 1,9° ±2,9° [16]; it resulted in a vestibuloversion of the lower incisors of 0,96°±0,30° i.e. 0.52 ±0.12 mm [14], to 4.9° [15]. Alessandri-Bonetti et al. [17] found with the Silensor® OA a mean palatoversion of the upper and lower incisors of 0.4° ±0.72° and 2.27° ±1.38° respectively. In our study, the Narval® OA resulted in a mean upper incisor vestibuloversion of 0.18 mm and a mean linguoversion of the lower incisors of 0.09mm. It is interesting to note that the Silensor® OA also found a tendency to lingualize the teeth of the lower dental arch [17], consistent with our study.

Narval® OA would therefore appear to be one of OAs with less dental resonance for incisors, premolars and molars compared to other OAs.

The use of CPPV for more than 2 years has been shown to alter the occlusion between dental arches and leaded to a reclining of the upper incisors and a significant retrusion of the anterior maxilla associated with a decrease in convexity [24]. A 0.1 ±0.6-mm-anteroposterior modification was also described under CPPV, as well as a decrease in the number of dental contact points at the premolar level [9]. CPPV would therefore result in dental movements in adults that were not intellectually obvious because CPPV device has no direct interaction with the teeth. Our study highlighted a maximal mean dental movements of 0.3mm with consistent therapeutic efficacy, which would seem to be quite acceptable compared to dental movements (0.1 ±0.6 mm) induced by CPPV [11].

Finally, there are spontaneous dental changes. In humans, dental spontaneous movements are mesial and vertical, explained by the "law of tangent" [25, 26]. This poses the problem of comparability of studies, even in the case of a control case study. Even a study on twins would not ensure of the complete comparability of the arms.

Limitations of our study

Our study is not without criticism. Firstly, we have chosen to quantify all dental movements in mm compared to the initial dental joint without referring to a bone base, whereas most studies performed their calculations on profile teleradiographies, i.e. on a bone base. We have chosen this method because the calculation of bone base modification on face and profile teleradiography does not seem accurate enough compared to a digital analysis. The ideal would therefore be a method combining dental displacement and modification of the bone bases, by digitization. We have already shown a marked improvement in the quality of digital dental printing in the absence of coloured amalgams or dentures [19].

In addition, the distant date of its realization can also be criticized. Indeed, it was carried out shortly after the establishment of the Narval® OA following the princeps study [7] in which we had participated. It was the subject of a MD thesis and was then forgotten. Recent publishing work [9, 10, 19] “exhumed” it and its interest rediscovered.

The small population size of our sample (15 patients vs. 787 to be integrated according to the population size calculation) does not prevent statistical tests from reaching a satisfactory level of significance. This low number does not reduce the power of the study.

Finally, if the high rate of noncompliance of the dental prints (63.5%) decreases the strength of our analysis, attrition bias is not as important because noncompliance has no reason to be more frequent in the event of dental displacement than in their absence. This ratio can be explained by the moment when the study was conducted. Indeed, the digitalized comparison technic was quite new. Now the 3D acquisition of dental prints should ease this comparison [19].

Conclusion

Our results confirmed that there was a significant but minimal dental displacement with the use of the Narval® OA, and that it would appear to be less important than with the use of a Herbst-type OA in the short to medium-term. A precise method of measuring both movements of bone bases and teeth should make it possible to be more precise.

Supplementary materials

Legend of Appendix 1

P: Patient number. T: oral appliance Duration (months). Min: Minimal mobility (mm). Max: maximum mobility (mm). Mean: average mobility of the block (mm). Dir: main axis of mobility. /yr: mobility (mm/year). 

X: event taken into account for the calculation of average and mobility per year. The number corresponds to the numbering of the tooth. U: Unusable information due to a deformation of the dental print or the addition of significant material. E: tooth Egress. I: tooth Ingress. O: dental Overlaps on the block.

Axis of direction of the mobility of the block: M: mesialization. D: distalization. V: vestibuloversion. L: lingoversion. ML: mesialization and lingoversion. MV: mesialization and vestibuloversion. DV: distalization and vestibuloversion. DL: distalization and linguoversion.

Conflict of Interest

No conflict of interest to declare.

References

Clearly Auctoresonline and particularly Psychology and Mental Health Care Journal is dedicated to improving health care services for individuals and populations. The editorial boards' ability to efficiently recognize and share the global importance of health literacy with a variety of stakeholders. Auctoresonline publishing platform can be used to facilitate of optimal client-based services and should be added to health care professionals' repertoire of evidence-based health care resources.

img

Virginia E. Koenig

Journal of Clinical Cardiology and Cardiovascular Intervention The submission and review process was adequate. However I think that the publication total value should have been enlightened in early fases. Thank you for all.

img

Delcio G Silva Junior

Journal of Women Health Care and Issues By the present mail, I want to say thank to you and tour colleagues for facilitating my published article. Specially thank you for the peer review process, support from the editorial office. I appreciate positively the quality of your journal.

img

Ziemlé Clément Méda

Journal of Clinical Research and Reports I would be very delighted to submit my testimonial regarding the reviewer board and the editorial office. The reviewer board were accurate and helpful regarding any modifications for my manuscript. And the editorial office were very helpful and supportive in contacting and monitoring with any update and offering help. It was my pleasure to contribute with your promising Journal and I am looking forward for more collaboration.

img

Mina Sherif Soliman Georgy

We would like to thank the Journal of Thoracic Disease and Cardiothoracic Surgery because of the services they provided us for our articles. The peer-review process was done in a very excellent time manner, and the opinions of the reviewers helped us to improve our manuscript further. The editorial office had an outstanding correspondence with us and guided us in many ways. During a hard time of the pandemic that is affecting every one of us tremendously, the editorial office helped us make everything easier for publishing scientific work. Hope for a more scientific relationship with your Journal.

img

Layla Shojaie

The peer-review process which consisted high quality queries on the paper. I did answer six reviewers’ questions and comments before the paper was accepted. The support from the editorial office is excellent.

img

Sing-yung Wu

Journal of Neuroscience and Neurological Surgery. I had the experience of publishing a research article recently. The whole process was simple from submission to publication. The reviewers made specific and valuable recommendations and corrections that improved the quality of my publication. I strongly recommend this Journal.

img

Orlando Villarreal

Dr. Katarzyna Byczkowska My testimonial covering: "The peer review process is quick and effective. The support from the editorial office is very professional and friendly. Quality of the Clinical Cardiology and Cardiovascular Interventions is scientific and publishes ground-breaking research on cardiology that is useful for other professionals in the field.

img

Katarzyna Byczkowska

Thank you most sincerely, with regard to the support you have given in relation to the reviewing process and the processing of my article entitled "Large Cell Neuroendocrine Carcinoma of The Prostate Gland: A Review and Update" for publication in your esteemed Journal, Journal of Cancer Research and Cellular Therapeutics". The editorial team has been very supportive.

img

Anthony Kodzo-Grey Venyo

Testimony of Journal of Clinical Otorhinolaryngology: work with your Reviews has been a educational and constructive experience. The editorial office were very helpful and supportive. It was a pleasure to contribute to your Journal.

img

Pedro Marques Gomes

Dr. Bernard Terkimbi Utoo, I am happy to publish my scientific work in Journal of Women Health Care and Issues (JWHCI). The manuscript submission was seamless and peer review process was top notch. I was amazed that 4 reviewers worked on the manuscript which made it a highly technical, standard and excellent quality paper. I appreciate the format and consideration for the APC as well as the speed of publication. It is my pleasure to continue with this scientific relationship with the esteem JWHCI.

img

Bernard Terkimbi Utoo

This is an acknowledgment for peer reviewers, editorial board of Journal of Clinical Research and Reports. They show a lot of consideration for us as publishers for our research article “Evaluation of the different factors associated with side effects of COVID-19 vaccination on medical students, Mutah university, Al-Karak, Jordan”, in a very professional and easy way. This journal is one of outstanding medical journal.

img

Prof Sherif W Mansour

Dear Hao Jiang, to Journal of Nutrition and Food Processing We greatly appreciate the efficient, professional and rapid processing of our paper by your team. If there is anything else we should do, please do not hesitate to let us know. On behalf of my co-authors, we would like to express our great appreciation to editor and reviewers.

img

Hao Jiang

As an author who has recently published in the journal "Brain and Neurological Disorders". I am delighted to provide a testimonial on the peer review process, editorial office support, and the overall quality of the journal. The peer review process at Brain and Neurological Disorders is rigorous and meticulous, ensuring that only high-quality, evidence-based research is published. The reviewers are experts in their fields, and their comments and suggestions were constructive and helped improve the quality of my manuscript. The review process was timely and efficient, with clear communication from the editorial office at each stage. The support from the editorial office was exceptional throughout the entire process. The editorial staff was responsive, professional, and always willing to help. They provided valuable guidance on formatting, structure, and ethical considerations, making the submission process seamless. Moreover, they kept me informed about the status of my manuscript and provided timely updates, which made the process less stressful. The journal Brain and Neurological Disorders is of the highest quality, with a strong focus on publishing cutting-edge research in the field of neurology. The articles published in this journal are well-researched, rigorously peer-reviewed, and written by experts in the field. The journal maintains high standards, ensuring that readers are provided with the most up-to-date and reliable information on brain and neurological disorders. In conclusion, I had a wonderful experience publishing in Brain and Neurological Disorders. The peer review process was thorough, the editorial office provided exceptional support, and the journal's quality is second to none. I would highly recommend this journal to any researcher working in the field of neurology and brain disorders.

img

Dr Shiming Tang

Dear Agrippa Hilda, Journal of Neuroscience and Neurological Surgery, Editorial Coordinator, I trust this message finds you well. I want to extend my appreciation for considering my article for publication in your esteemed journal. I am pleased to provide a testimonial regarding the peer review process and the support received from your editorial office. The peer review process for my paper was carried out in a highly professional and thorough manner. The feedback and comments provided by the authors were constructive and very useful in improving the quality of the manuscript. This rigorous assessment process undoubtedly contributes to the high standards maintained by your journal.

img

Raed Mualem

International Journal of Clinical Case Reports and Reviews. I strongly recommend to consider submitting your work to this high-quality journal. The support and availability of the Editorial staff is outstanding and the review process was both efficient and rigorous.

img

Andreas Filippaios

Thank you very much for publishing my Research Article titled “Comparing Treatment Outcome Of Allergic Rhinitis Patients After Using Fluticasone Nasal Spray And Nasal Douching" in the Journal of Clinical Otorhinolaryngology. As Medical Professionals we are immensely benefited from study of various informative Articles and Papers published in this high quality Journal. I look forward to enriching my knowledge by regular study of the Journal and contribute my future work in the field of ENT through the Journal for use by the medical fraternity. The support from the Editorial office was excellent and very prompt. I also welcome the comments received from the readers of my Research Article.

img

Dr Suramya Dhamija

Dear Erica Kelsey, Editorial Coordinator of Cancer Research and Cellular Therapeutics Our team is very satisfied with the processing of our paper by your journal. That was fast, efficient, rigorous, but without unnecessary complications. We appreciated the very short time between the submission of the paper and its publication on line on your site.

img

Bruno Chauffert

I am very glad to say that the peer review process is very successful and fast and support from the Editorial Office. Therefore, I would like to continue our scientific relationship for a long time. And I especially thank you for your kindly attention towards my article. Have a good day!

img

Baheci Selen

"We recently published an article entitled “Influence of beta-Cyclodextrins upon the Degradation of Carbofuran Derivatives under Alkaline Conditions" in the Journal of “Pesticides and Biofertilizers” to show that the cyclodextrins protect the carbamates increasing their half-life time in the presence of basic conditions This will be very helpful to understand carbofuran behaviour in the analytical, agro-environmental and food areas. We greatly appreciated the interaction with the editor and the editorial team; we were particularly well accompanied during the course of the revision process, since all various steps towards publication were short and without delay".

img

Jesus Simal-Gandara

I would like to express my gratitude towards you process of article review and submission. I found this to be very fair and expedient. Your follow up has been excellent. I have many publications in national and international journal and your process has been one of the best so far. Keep up the great work.

img

Douglas Miyazaki

We are grateful for this opportunity to provide a glowing recommendation to the Journal of Psychiatry and Psychotherapy. We found that the editorial team were very supportive, helpful, kept us abreast of timelines and over all very professional in nature. The peer review process was rigorous, efficient and constructive that really enhanced our article submission. The experience with this journal remains one of our best ever and we look forward to providing future submissions in the near future.

img

Dr Griffith

I am very pleased to serve as EBM of the journal, I hope many years of my experience in stem cells can help the journal from one way or another. As we know, stem cells hold great potential for regenerative medicine, which are mostly used to promote the repair response of diseased, dysfunctional or injured tissue using stem cells or their derivatives. I think Stem Cell Research and Therapeutics International is a great platform to publish and share the understanding towards the biology and translational or clinical application of stem cells.

img

Dr Tong Ming Liu

I would like to give my testimony in the support I have got by the peer review process and to support the editorial office where they were of asset to support young author like me to be encouraged to publish their work in your respected journal and globalize and share knowledge across the globe. I really give my great gratitude to your journal and the peer review including the editorial office.

img

Husain Taha Radhi

I am delighted to publish our manuscript entitled "A Perspective on Cocaine Induced Stroke - Its Mechanisms and Management" in the Journal of Neuroscience and Neurological Surgery. The peer review process, support from the editorial office, and quality of the journal are excellent. The manuscripts published are of high quality and of excellent scientific value. I recommend this journal very much to colleagues.

img

S Munshi

Dr.Tania Muñoz, My experience as researcher and author of a review article in The Journal Clinical Cardiology and Interventions has been very enriching and stimulating. The editorial team is excellent, performs its work with absolute responsibility and delivery. They are proactive, dynamic and receptive to all proposals. Supporting at all times the vast universe of authors who choose them as an option for publication. The team of review specialists, members of the editorial board, are brilliant professionals, with remarkable performance in medical research and scientific methodology. Together they form a frontline team that consolidates the JCCI as a magnificent option for the publication and review of high-level medical articles and broad collective interest. I am honored to be able to share my review article and open to receive all your comments.

img

Tania Munoz

“The peer review process of JPMHC is quick and effective. Authors are benefited by good and professional reviewers with huge experience in the field of psychology and mental health. The support from the editorial office is very professional. People to contact to are friendly and happy to help and assist any query authors might have. Quality of the Journal is scientific and publishes ground-breaking research on mental health that is useful for other professionals in the field”.

img

George Varvatsoulias

Dear editorial department: On behalf of our team, I hereby certify the reliability and superiority of the International Journal of Clinical Case Reports and Reviews in the peer review process, editorial support, and journal quality. Firstly, the peer review process of the International Journal of Clinical Case Reports and Reviews is rigorous, fair, transparent, fast, and of high quality. The editorial department invites experts from relevant fields as anonymous reviewers to review all submitted manuscripts. These experts have rich academic backgrounds and experience, and can accurately evaluate the academic quality, originality, and suitability of manuscripts. The editorial department is committed to ensuring the rigor of the peer review process, while also making every effort to ensure a fast review cycle to meet the needs of authors and the academic community. Secondly, the editorial team of the International Journal of Clinical Case Reports and Reviews is composed of a group of senior scholars and professionals with rich experience and professional knowledge in related fields. The editorial department is committed to assisting authors in improving their manuscripts, ensuring their academic accuracy, clarity, and completeness. Editors actively collaborate with authors, providing useful suggestions and feedback to promote the improvement and development of the manuscript. We believe that the support of the editorial department is one of the key factors in ensuring the quality of the journal. Finally, the International Journal of Clinical Case Reports and Reviews is renowned for its high- quality articles and strict academic standards. The editorial department is committed to publishing innovative and academically valuable research results to promote the development and progress of related fields. The International Journal of Clinical Case Reports and Reviews is reasonably priced and ensures excellent service and quality ratio, allowing authors to obtain high-level academic publishing opportunities in an affordable manner. I hereby solemnly declare that the International Journal of Clinical Case Reports and Reviews has a high level of credibility and superiority in terms of peer review process, editorial support, reasonable fees, and journal quality. Sincerely, Rui Tao.

img

Rui Tao

Clinical Cardiology and Cardiovascular Interventions I testity the covering of the peer review process, support from the editorial office, and quality of the journal.

img

Khurram Arshad